Well, as it turns out, retirement allows me to attend auctions whenever I want! So I bought a 20 inch W-T press today for $350. It was a monster to get out of the basement where the PO had his shop, but three of us managed to move it and load in my pickup. I unloaded at home with my engine hoist and that procedure worked out like a champ. Now have to do some reassembly and see how it works. It has the power feed and everything is there. The production table is pristine, no drill marks and has slots machined for vise attachments. Motor is single phase. From the W-T badge, appears to be manufactured prior to 1948, serial number is shown as 27-1144. Hopefully the spindle bearings are OK and I wire the motor back correctly!