Page 1 of 2 12 LastLast
Results 1 to 15 of 18

Thread: Wixey Digital Angle Guage

  1. #1

    Wixey Digital Angle Guage

    Hey, getting more into woodworking--most of what I have been invloved in is bigger remodeling construction projects. I am about done with that sort of thing and moving into finer smaller projects. I have seen one of these digital gauges on Amazona and they great reviews. Is it worth getting?

  2. #2
    Join Date
    Jul 2007
    Location
    NE OH
    Posts
    2,615
    For the money, I find it pretty useful, in woodworking and in remodeling/construction work.

    I use it a quick setup check on machines like the table saw and especially my compound miter saw. Put it on the table, zero it, then put it on the blade and check 0 and 45 stops.
    If it shows the stops are out, I still tend to use a square and miter square to do the actual adjustments; they are my trusted references. But the gauge is fast for a quick check.
    Of course the ultimate check is a test cut.
    Very handy when tilting the drill press table; the scales on them are usually pretty bad.
    For construction, it's a quick way to check the slope on plumbing drains, measuring roof pitch...etc.
    IIRC, the first version used a coin cell battery that went dead pretty fast. Later model uses AA or AAA; that's the one you want.

  3. #3
    Well that's enough for me. I'm sold. Thanks for the input.

  4. #4
    Join Date
    Feb 2005
    Location
    Texas Hill Country
    Posts
    705
    Quote Originally Posted by Paul F Franklin View Post
    For the money, I find it pretty useful, in woodworking and in remodeling/construction work.

    I use it a quick setup check on machines like the table saw and especially my compound miter saw. Put it on the table, zero it, then put it on the blade and check 0 and 45 stops.
    If it shows the stops are out, I still tend to use a square and miter square to do the actual adjustments; they are my trusted references. But the gauge is fast for a quick check.
    Of course the ultimate check is a test cut.
    Very handy when tilting the drill press table; the scales on them are usually pretty bad.
    For construction, it's a quick way to check the slope on plumbing drains, measuring roof pitch...etc.
    IIRC, the first version used a coin cell battery that went dead pretty fast. Later model uses AA or AAA; that's the one you want.
    Paul,
    I've got a Wixey as well and love it. But your comment about using it for tilting your drill press table had me thinking "what a great idea!". I've only used it on my table saw and my saw top is the baseline. Doesn't matter if it's flat in the real world all that matters is that the blade is 90° to the tabletop. It seems to me to be the reverse with the drill press where the chuck and the drill bit are your baseline and the tabletop has to be 90° to those. I usually have use one of my Starrett squares but my eyesight isn't what it used to be and trying to see if the blade of the square is flush to a drill bit along it's length with the unbroken edges of a drill bit makes it difficult for me. I've never been 100% confident my tabletop is dead on perpendicular to the chuck/bit.

    Hopefully, I'm making myself clear. In that scenario, what is your procedure for that?

    Not trying to highjack your thread Scott! My apologies but this could be useful for both of us? ;-)

  5. #5
    Join Date
    Feb 2003
    Location
    McKean, PA
    Posts
    15,593
    Blog Entries
    1
    I have the original Beall Tilt Box and use it whenever I need to tilt my blade or come back to 90 on my table saw. I also use it to check other tools. I've compared it to using squares and drafting triangles and it seems to be at least as accurate but much quicker to use.
    Lee Schierer
    USNA '71
    Go Navy!

    My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute

  6. #6
    I have one and love it. Take out the battery after each use.
    "All that is necessary for the triumph of evil is that good men do nothing."

    “If you want to know what a man's like, take a good look at how he treats his inferiors, not his equals.”

  7. #7
    Join Date
    Dec 2012
    Location
    Bedford, NH
    Posts
    1,286
    To answer your question, YES!
    Thoughts entering one's mind need not exit one's mouth!
    As I age my memory fades .... and that's a load off my mind!

    "We Live In The Land Of The Free, Only Because Of The Brave"
    “The problems we face today are there because the people who work for a living are outnumbered by those who vote for a living."
    "
    Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill

  8. #8
    Join Date
    Dec 2017
    Location
    Marietta, GA
    Posts
    275
    It's all I use to set the angle on my table saw. IGaging has one that's rechargeable through a USB port and has batteries on three sides. I use it more than my old Wixey (which I just checked and had a dead battery).

  9. #9
    Join Date
    Sep 2013
    Location
    Wayland, MA
    Posts
    3,655
    I have the Tilt Box II and find it very useful. It doesn't eat up batteries the way some others apparently do. I may have changed the battery once in the last decade.

  10. #10
    Join Date
    Jan 2007
    Location
    Ottawa, ON Canada
    Posts
    1,468
    Mike: I can't speak for how Paul uses his on his drill press, but I have a Beall tilt box that I use on mine. I put the 1/2" transfer punch in my drill chuck and stick the box onto it. I can then zero out the box, put it onto the drill press table and tilt to where I like. As you said, it's just the opposite of the table saw set up. The transfer punch set is useful for many things and they are not expensive.
    Grant
    Ottawa ON

  11. #11
    Quote Originally Posted by Scott Adams View Post
    Hey, getting more into woodworking--most of what I have been invloved in is bigger remodeling construction projects. I am about done with that sort of thing and moving into finer smaller projects. I have seen one of these digital gauges on Amazona and they great reviews. Is it worth getting?
    For general use, yes. But as someone pointed out, for super accurate cuts, you still need to make test cuts. Mine (tilt box 2) is accurate to 0.2*. You should get the more expensive version (WR365) which has a + or - 0.1* accuracy.

    Simon
    Last edited by Simon MacGowen; 01-15-2018 at 9:54 AM.

  12. #12
    Join Date
    Jul 2007
    Location
    NE OH
    Posts
    2,615
    Transfer punch is a good idea. I usually just lower the quill a few inches and lock it, then stick the box to the quill and zero the reading, then check the table. Of course, you have to use a little care so the box is on the side of the quill (or punch), otherwise your reading will be thrown off if your press happens to lean forward or back.

  13. #13
    Join Date
    Apr 2013
    Location
    Kansas City
    Posts
    2,652
    I have one and its been very useful tool. Helped me identify a problem keeping tablesaw and mitersaw blades at 90. Easy to recheck setup periodically. Whether its the best such device, I can't say. It does eat batteries.

  14. #14
    Join Date
    Dec 2017
    Location
    Marietta, GA
    Posts
    275
    The most accurate way to check a drill press is to "tram" it. Basically rig up a dial indicator on the end of small board with a shaft on the other end which you can put in the chuck. Turn the chuck (by hand, drill unplugged) checking the reading on the dial indicator against the table all the way around. This will tell you if your table is tilted side to side and/or front to back. Google "tramming a drill press" and you'll find videos and articles.

    This is the same method used to make sure spindles/router motors are perpendicular to the bed of a CNC machine.

  15. #15
    Join Date
    Sep 2006
    Location
    Deep South
    Posts
    3,970
    I have the standard Wixey tilt angle gauge and also the digital readout for my planer. I would hate to do without either one.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •