Ok so I’m tired of making furniture with all 90 degree angles, so I’m trying to make a somewhat curved lid for the trunk I’m making. The lid isn’t going to be perfectly curved, it will have a flat piece at the top due to the dimensions. I made the box first so that way I knew the definite size. The sides are 5 1/2 x 20 1/16”. I’m trying to make all the angles easy, so in the scale model I used all 20 degree angles. However, I’ve spent hours trying to draw this on a full size test piece, but I just can’t do it. Even on the scale model, I’m sure there’s a way to create the curve without having the flat top, but I just can’t figure out how to do it. Does anyone recommend tools and a technique of doing this?


2B8318C0-C341-464F-96CF-263E3E1B3E0C.jpg

965BBC76-CB31-4BF4-ADAC-E5537FA270E9.jpg

103A38BC-43B7-4E9E-8B55-A627842BAC1C.jpg