Results 1 to 12 of 12

Thread: Tree caliper

  1. #1
    Join Date
    May 2009
    Location
    houston tx
    Posts
    652

    Tree caliper

    Howdy folks, Many times in my woodworking I find myself needing to harvest a certain size tree. Sometimes I just want to know how big a tree is. I decided to finally do something about it the other day and came up with this.
    Attached Images Attached Images

  2. #2
    Join Date
    May 2009
    Location
    houston tx
    Posts
    652
    image.jpgThe handle allows you to size in 2" increments.
    Attached Images Attached Images

  3. #3
    Join Date
    May 2009
    Location
    houston tx
    Posts
    652
    I skewed the measurements around the side of the handle to make them easier to see.
    Attached Images Attached Images

  4. #4
    Join Date
    Dec 2012
    Location
    Bedford, NH
    Posts
    1,286
    Neat! Handy Dandy!
    Thoughts entering one's mind need not exit one's mouth!
    As I age my memory fades .... and that's a load off my mind!

    "We Live In The Land Of The Free, Only Because Of The Brave"
    “The problems we face today are there because the people who work for a living are outnumbered by those who vote for a living."
    "
    Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill

  5. #5
    Join Date
    Feb 2003
    Location
    McKean, PA
    Posts
    15,593
    Blog Entries
    1
    I give up, how does it work.
    Lee Schierer
    USNA '71
    Go Navy!

    My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute

  6. #6
    Join Date
    May 2009
    Location
    houston tx
    Posts
    652
    Like a caliper? You open it up, put it on the tree and find what size diameter it is.

    Anyone who might need something like this if I was to do it again I'd lengthen the front pieces. Mine are about 6" long. I'd lengthen that to 10 or 12". When I measure trees 32" + the caliper sides kinda get in the way. If the tips were longer it would solve that.

    All in all it took me 30minutes to build these. That included having to cut 1,5" aluminum angle into 1" flat bar and ripping the 2X4. its been fun checking my trees. I have a ERC that is 34" and many that are 28"+. Those are some nice ERC. When I build these benches I consider 14" about right. Now I know for sure when I'm looking.
    Attached Images Attached Images

  7. #7
    Join Date
    Mar 2015
    Location
    cleveland,tn.
    Posts
    385
    I know people have had problems with picture orientation on this site but the first think I thought was I wonder if gravity works differently on your planet ha ha ha ha nice bench like the simple legs and termite control blocks

  8. #8
    They do make tape measures that convert to diameter when you wrap them around the circumference, since trees are rarely perfectly round. Foresters use them to calculate tree volume. However. If you need an absolute measurement for the widest part of a tree trunk, then a caliper would work.

  9. #9
    Join Date
    May 2009
    Location
    houston tx
    Posts
    652
    Trying to wrap a tape measure around a 34" trunk solo doesn't sound fun. Besides that this was built from scrap 2x4, Extra aluminum angle and a bolt and nut, so the cost was virtually zero. I don't need to know volume. I simply need to know a, will it fit my needs and b. Will my saw be able to mill it.

  10. #10
    Join Date
    Feb 2008
    Location
    E TN, near Knoxville
    Posts
    12,298
    Quote Originally Posted by Dale Stansbery View Post
    They do make tape measures that convert to diameter when you wrap them around the circumference, since trees are rarely perfectly round. Foresters use them to calculate tree volume. However. If you need an absolute measurement for the widest part of a tree trunk, then a caliper would work.
    There are calibrated sticks that can measure diameter. Can measure height too. Look up "Biltmore stick."

    This page has a good diagram with how it works.
    http://pubs.ext.vt.edu/420/420-560/420-560.html

    These are used to estimate the board feet in a log. The caliper would be more accurate.

  11. #11
    Join Date
    Dec 2012
    Location
    Bedford, NH
    Posts
    1,286
    There are Pi tapes that you could use. It's a steel tape that wraps around a circular object & gives you the diameter. The only downside is that you would have to wrap it around the tree and that could be problematic on larger trees trying to reach around to grab the other end of the tape.

    So, your idea of a large caliper is a good one. Well done.
    Thoughts entering one's mind need not exit one's mouth!
    As I age my memory fades .... and that's a load off my mind!

    "We Live In The Land Of The Free, Only Because Of The Brave"
    “The problems we face today are there because the people who work for a living are outnumbered by those who vote for a living."
    "
    Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill

  12. #12
    Join Date
    Feb 2008
    Location
    E TN, near Knoxville
    Posts
    12,298
    Quote Originally Posted by Al Launier View Post
    There are Pi tapes that you could use. It's a steel tape that wraps around a circular object & gives you the diameter. The only downside is that you would have to wrap it around the tree and that could be problematic on larger trees trying to reach around to grab the other end of the tape.
    One way is to hold the end of the tape with a gimlet or something inserted into the bark or crevice then walk around the tree with the rest of the tape. A cloth tape works better than a steel tape. I've measured trees on my property about 12' in circumference this way.

    Gimlet1-300x158.jpg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •