it isn't any really any larger than my HF 12 x 33 at 12 x 35. If does have a larger capacity for turning up to 16 inch stock in the gap bed. It has indexing which I don't quite under stand and out board turning capacity. The important thing to me was the lower 340 rpm speed, still variable too. I mounted a 9 inch piece of stock for a bowl on the hF and it walked across the floor at 600 rpm. The Rockwell came with the parts list and a manual for a Delta lathe that sppears to be identical to the Rockwell. It is heavier by about 80 pounds.

The price was certainly right at less than my HF lathe.

Does anybody who had or has one have any advice about them that may not be evident to a newbie?

How is the indexing used? Is there a way to mount a drill or engraver for use with the indexing feature? either on the banjo or some other way. Maybe mount a small drill press on the bed?