So we're taking delivery of our Trotec Speedy 400 in February and we couldn't be more thrilled with the process! I'm a little confused on exhaust options though. We will be cutting and engraving mostly wood, with some acrylic work. The laser we currently use has an inline exhaust fan venting outside, is this the type of setup I should use for the Trotec? Or should I buy a dust collector (this is the one that was recommended to me: http://www.atlas-machinery.com/1-1-2...with-canister/) and exhaust into the bags? Any help would be much appreciated, we're in the country with no neighbours so exhausting outside is not going to be an issue. I'd like to keep the noise to a minimum in the shop. Thanks in advance!