Results 1 to 15 of 16

Thread: Control pad went dark. How can I determine if problem is Controller or Pad?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 01-10-2018, 10:44 PM #1
    Joseph Shawa
    Joseph Shawa is offline [OP] Member
    Join Date
    Apr 2014
    Posts
    221

    Control pad went dark. How can I determine if problem is Controller or Pad?

    It is the Leetro MPC 6525. Cannot control machine from software or pad. Cannot connect to machine.
    Thinking it has to be the controller.

    Bummer is that I was in the middle of a very long job.

    Any help? I haven't had this problem yet.

    If it is the controller then I am going to switch controllers. Any newer and better boards out yet?
    Last edited by Joseph Shawa; 01-10-2018 at 10:48 PM.
    Chinese 6040 by NiceCut. Originally 60 Watt upgraded to 150 Watt.....I thought I had pretty much every problem in the book of laser cutting. It turns out that there is a set of books.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules