Originally Posted by
John Beaver
I like the Lenox blades from toolcenter.com
Diemaster 2 for dry wood
#32 Wood for wet wood
+1 on the Lenox Diemaster. Same blade I use and I can attest to their cutting ability. Re-sawing some old Oak timbers from an old covered bridge, cut through a 1/4 steel spike twice and didn't even know it until I was looking at the planks. Didn't phase the blade at all and that was three years ago.
____________________________________________
JD at J&J WoodSmithing
Owingsville, Kentucky
"The best things in life are not things."