Hi all - I’ve got some 16’ quarter saw oak beams to install in a new bedroom and looking for finishing advice. The finish would be decorative only since the beams will be practically never touched. I’ve got very old antique pine floors that I finished with 7 coats of waterlox. So I think I need some color on the oak but not too dark or deep.
Was thinking of watco danish oil/varnish with a built in stain for color and some long term moisture protection and a bit of the finished look. Not sure if that will show off the grain enough or mute it. I’ve read/seen different approaches using fillers or stain or some kind of combo to make the grain pop - but it’s left me confused and wondering if I’m overthinking it.
Any suggestions?