Has anyone laser engraved any nambe metal products? Can cermark be used to engrave on these metal products?
Thanks
Deeb
Has anyone laser engraved any nambe metal products? Can cermark be used to engrave on these metal products?
Thanks
Deeb
Never heard of them, but this is directly off their website:
So my guess would be a fiber would work and you'll probably get mixed results with cermark.Most Nambé alloy and crystal items can be personalized.
Our crystal items are personalized through a process called laser etching, which produces a result very similar to sandblasting. We create a high-resolution image of your message and turn it over to our personalization experts, who use a computerized laser to create your message onto the surface of your Nambé purchase.
For our Nambé Alloy products, the laser-etch process is followed by sandblasting for impressively sharp edges.
60W, Boss Laser 1630
75W, Epilog Legend 24EX
Jet Left Tilting table saw and Jet 18" Band saw
Adobe Creative suite and Laserworks 8
Keith,
Thanks for your response. We don't have a fiber so I think I will pass.
Nambe is just an aluminum alloy trying to be fancy... I have marked them with my fiber but doubt you'll have much luck with Cermark, too much metal that acts as a very good heat sink. If you have at least 80 watts you might be able to do it but I'd do some testing first.