I am about to out grow my office in the house and will soon be moving everything out to my shop. Its currently a 12x24 w/ a 12' lean to off the back but I will be closing that part in, to create a 24'x24. My though is to have a little office (10x12) and "conference room" in the front part. In the back part, I have room for (2) 18x32 lasers, a big wash sink, a 3'x6' table and counters all around the walls. I plan to hang wall cabinets and or shelving on the walls.
In my current office I can reach my desk, laser and storage rack all at the same time, so my prep area/walking flow is pretty tight. Once in the shop, I will have a lot more room to move around, so I need to think about how the back part will be arranged. I want to minimize wasted walking but still have room for storage and job work flow.
If you don't mind sharing, what is there about your shop layout that you would change tomorrow? Is your sink to far away or do you not have enough prep room or not enough storage....etc.
Thank you for your time!
Trey