Camtech Laser - laser power issue

[Miguel Pinho]

Hello

I need your help...what may be causing this problem on my laser? The laser sometimes loses power when engraving, sometimes it dont (see image). Its not a regular issue, sometimes i can do several jobs without the laser failing.

My machine is Camtech Laser l5 with a 25watts laser synrad tube.

20171214_135754.jpg

[Miguel Pinho]

Problem solved. Voltage under 30VCD.

Adjust laser power supply to 30V.

[Kev Williams]

Good to know, thanks!

[Bill George]

Problem solved. Voltage under 30VCD.

Adjust laser power supply to 30V.

Yes thanks for checking back in, you may have helped others solve their problem!