Quote Originally Posted by John Keeton View Post
It may have been the thread I posted reviewing the Revo 1836 where you saw the under bed storage, but in any event, I have attached a pic for you. The larger "box" under the drawers is a ballast box containing four 60# bags of sand. The tool racks I have are based on a design used by some earlier creekers and a PDF is attached on their construction. Easy to make out of scrap stock and functional. The plastic bins are where I store sandpaper - both discs and sheet stock that I have cut into 12 pieces per sheet. Feel free to email me if you have any questions. As I may have commented before - great choice on a lathe and you are going to really enjoy it. In the pic of the lathe, you will notice I have the headstock moved to the end of the lathe. I just finished a 24" offset platter using the bed extension accessory - so glad I got that!!
That's nice enough to mass produce! It looks like not only a tool holder, but a tool display, and it's just nice to have things looking so good.