Anyone have a South Bend 7" Shaper with the original South Bend low voltage control option that could help me wire mine up?
Thanks,
Eric
Anyone have a South Bend 7" Shaper with the original South Bend low voltage control option that could help me wire mine up?
Thanks,
Eric
See you got no response,maybe post a pic of your machine and the controls that you have.Maybe google SB w/model #'s something may pop up,I don't have the shaper but have the lathe that once had LV controls----Carroll
Maybe call these people and check with them http://www.grizzly.com/brands/south-bend-lathe/parts
Last edited by Carroll Courtney; 12-10-2017 at 9:19 AM.
Go here these folks will know, I do not have a clue> http://bbs.homeshopmachinist.net/forums/3-General
Retired Guy- Central Iowa.HVAC/R , Cloudray Galvo Fiber , -Windows 10
I don't have the same machine but do have experience with motor controls. If you can post pics and/or describe what you have I may be able to help.
_______________________________________
When failure is not an option
Mediocre is assured.