Results 1 to 4 of 4

Thread: South Bend 7" Shaper Low Voltage Control Help

  1. #1

    South Bend 7" Shaper Low Voltage Control Help

    Anyone have a South Bend 7" Shaper with the original South Bend low voltage control option that could help me wire mine up?

    Thanks,

    Eric

  2. #2
    Join Date
    Dec 2006
    Location
    Porter,TX
    Posts
    1,170
    See you got no response,maybe post a pic of your machine and the controls that you have.Maybe google SB w/model #'s something may pop up,I don't have the shaper but have the lathe that once had LV controls----Carroll
    Maybe call these people and check with them http://www.grizzly.com/brands/south-bend-lathe/parts
    Last edited by Carroll Courtney; 12-10-2017 at 9:19 AM.

  3. #3
    Join Date
    Mar 2014
    Location
    Iowa USA
    Posts
    3,370
    Go here these folks will know, I do not have a clue> http://bbs.homeshopmachinist.net/forums/3-General
    Retired Guy- Central Iowa. , LightObject 40w CO2 Laser and Chiller, MakerGear M2 3D Printer. Fine Line Automation 4x4 CNC Router- Mach4 ESS

  4. #4
    I don't have the same machine but do have experience with motor controls. If you can post pics and/or describe what you have I may be able to help.
    _______________________________________
    When failure is not an option
    Mediocre is assured.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •