Results 1 to 4 of 4

Thread: dynatorch plasma system

  1. #1

    dynatorch plasma system

    Anyone out there have any experiance with the Dynatorch Super B plasma cutting table, pros/cons. Thinking about purchasing one and from all I have read it seems to be well built, what about tech support and service after the sale?

  2. #2
    Join Date
    Mar 2014
    Location
    Iowa USA
    Posts
    2,889
    Quote Originally Posted by Dan Laser View Post
    Anyone out there have any experiance with the Dynatorch Super B plasma cutting table, pros/cons. Thinking about purchasing one and from all I have read it seems to be well built, what about tech support and service after the sale?
    Looks like an improved PlasmaCAM which is about $10k or so, but their software is awesome. Its scary when they do not list the price online and you need to get a "quote" from Dynatorch. I would ask about the warranty when I had my PlasmaCAM years ago the Warranty was only 90 days!! They were also not very nice... but I think that's all changed.
    Retired Guy- Central Iowa. , Ray Fine 20w Galvo Fiber laser , LightObject 40w CO2 Laser and Chiller, MakerGear M2 3D Printer. Qe60+ Vinyl cutter. Automation Tech Chinese 6040 Router running on Mach3 and UC400ETH, Fine Line Automation 4x4 CNC Router

  3. #3
    Thanks for the response!

  4. #4
    Join Date
    Mar 2012
    Location
    Sydney AU
    Posts
    25
    I have used SuperB with PowerMax65 for a while. Pros - very responsive support. Cons - depends on what you are going to cut and the finish you are expecting also they don't supply preprocessor you would need to use interim software like SheetCam or alike to convert your drawings into the format..
    500W Fiber Laser, Tekcel VLS CNC Router, Roland GX-640

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •