Byron
Have you tried adjusting the built in compressor? I would attempt that before buying an external unit.
I'm only cutting 1/8" hardwoods and plywood but the built in compressor has worked well.
Byron
Have you tried adjusting the built in compressor? I would attempt that before buying an external unit.
I'm only cutting 1/8" hardwoods and plywood but the built in compressor has worked well.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
Thanks Mike. I actually wait for the machine to arrive soon. According to the preinstallation requirements, "an external compressed air supply is required" for the gas kit. The gas/air requirements:
free of mechanical particles or liquid substances (dust, oil, water)
flow rate 150l/min = 40gpm
max pressure 145 psi
That is why I am asking for recommendation. I will definitely adjust the internal one. Right now I am thinking of buying California Air Tools 30 Gal. Portable 2.0 HP Ultra-Quiet and Oil-Free Air Compressor with Automatic Drain Valve from Home depot. But that is not cheap!