Page 2 of 2 FirstFirst 12
Results 16 to 17 of 17

Thread: Trotec Speedy 360 in machine compressor replacement

  1. #16
    Byron

    Have you tried adjusting the built in compressor? I would attempt that before buying an external unit.

    I'm only cutting 1/8" hardwoods and plywood but the built in compressor has worked well.
    Mike Null

    St. Louis Laser, Inc.

    Trotec Speedy 300, 80 watt
    Woodworking shop CLTT and Laser Sublimation
    Evolis Card Printer
    CorelDraw X5

  2. #17
    Quote Originally Posted by Mike Null View Post
    Byron

    Have you tried adjusting the built in compressor? I would attempt that before buying an external unit.

    I'm only cutting 1/8" hardwoods and plywood but the built in compressor has worked well.
    Thanks Mike. I actually wait for the machine to arrive soon. According to the preinstallation requirements, "an external compressed air supply is required" for the gas kit. The gas/air requirements:
    free of mechanical particles or liquid substances (dust, oil, water)
    flow rate 150l/min = 40gpm
    max pressure 145 psi

    That is why I am asking for recommendation. I will definitely adjust the internal one. Right now I am thinking of buying California Air Tools 30 Gal. Portable 2.0 HP Ultra-Quiet and Oil-Free Air Compressor with Automatic Drain Valve from Home depot. But that is not cheap!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •