Hello,

Currently i have a harbor freight unit with a similar setup as here:
https://jayscustomcreations.com/2013...ust-collector/

I have 10 foot ceilings in my 20x20 detach garage. one side of the garage has a stairway where i built a wall to hide and sound proof this unit and exhaust it outside. To allow for access to the tools on the opposite side of the garage i installed PVC along the ceiling. I didn't even think of it at the time but the vertical rise sees to have had a pretty extensive affect on the suction. so much so i keep the blast gates closed and use a small shop vac to aid in some of the collection.

My question is if i were to buy the 3hp grizzly unit below and modify it to use the same setup as above will i have enough suction to use the tools on the far side of the garage? Changing the layout of the piping isn't an option as i have a garage door and stairs on the one side and the opposite side of that wall a number of windows and doorway so the way i have it i think is ideal. Just not ideal for this unit.

http://www.grizzly.com/products/3-HP...eries/G1030Z2P

What do people think?

Thanks.