Here's a few images of a dining table I recently completed. The design is based on the Greene & Greene Thorsen House dining table. The top is elliptical which added some complexity to the construction and is made from shop sawn pommelle figured sapele veneer. As shown here, without the leaves, the table measures 65" x 75". Adding the four 15" leaves brings the overall length to 135" with seating for twelve guests.

IMG_1526.jpg

The remainder of the table is quarter sawn sapele.

IMG_1529.jpg

There are 142 square ebony plugs, 32 splines and 22 rectangular plugs in this table.

fullsizeoutput_203.jpg


The finish is General Finishes dye stain with Target Coatings EM6000 water borne lacquer top coat.

IMG_1536.jpg

This table took about 500 hours to complete. Thanks for looking!