Used metal. Was concerned about static developing with pvc. Used screws, silicone, and aluminum tape at joints. Have Oneida cyclone but still need to use shop vacuum.
Used metal. Was concerned about static developing with pvc. Used screws, silicone, and aluminum tape at joints. Have Oneida cyclone but still need to use shop vacuum.
I am in the process of designing dust collecting piping using Nordfab ducting. Would you be willing to share your personal experiences with Nordfab products?
I used pvc since I had a good source of cheap pipe and fittings. Do Fernco fitting work on the sheet metal pipe or do they crush it and not really seal?
Bill D