I have this and a cd of the software trying to install it to another machine like several suggested. It is asking me for a usb dongle?? Never got that from triumph laser? what do I do?
[OP]
Member
I have this and a cd of the software trying to install it to another machine like several suggested. It is asking me for a usb dongle?? Never got that from triumph laser? what do I do?
Contributor
You didn't get what looks like a flash drive to plug into a USB port? If not, then the dongle is 'built in' and the machine and computer are basically inseparable. If that's the case, email Yolanda > support@triumphlaser.com < and ask if you can get a separate dongle-
.
.
Last edited by Kev Williams; 10-25-2017 at 12:44 PM.
========================================
ELEVEN - rotary cutter tool machines
FOUR - CO2 lasers
THREE- make that FOUR now- fiber lasers
ONE - vinyl cutter
CASmate, Corel, Gravostyle
I think most of the newer machines having built in 'dongle'. Mine has no separate dongle. Makes it a pain to design on a computer that isn't connected to the laser....
Woodworking, Old Tools and Shooting
Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
SFX 50 Watt Fiber Laser
PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
Powermatic 100-12 planer, Rockwell 15-126 radial drill press
Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others
Contributor
FWIW, mine has a dongle which HAS allowed me to change the computer, but I still do all my designing on a separate computer in Corel. EVERYTHING I do in Corel is exported as a DXF which I import into EZcad. I DO have Corel on the fiber computer for tweaks...
so, IF your dongle is built in, have you tried copying the entire Triumph folder catalog onto another computer? That may work, as I would expect the dongle info to be within its own folders, I don't think anything to do with these machines or EZcad is written into the registry...
========================================
ELEVEN - rotary cutter tool machines
FOUR - CO2 lasers
THREE- make that FOUR now
ONE - vinyl cutter
CASmate, Corel, Gravostyle
Contributor
With EZCad the machine is the dongle.Originally Posted by ian mcfarland
Retired Guy- Central Iowa.HVAC/R , Cloudray Galvo Fiber , -Windows 10
[OP]
Member
Ok I will see with they say I guess i can use it on 2 computers as long as they both are not online at the same time. I will try coping the files over too.
I bought a asus rog g751jy today to use for the computer and designs so I can stop moving stuff back and forth and have a high end computer which has a graphics card and can do fast calculations.
[OP]
Member
all good they got the new machine up and running works fast now no down time to mark2 or blips so far.
Member
Maybe someone here can help me, I have a rotary i never needed it till now and have never set it up, I emailed david at Triumph
but that was no help, Everything he told me to do hasn't helped, If anyone can help me it would be appreciated.
Thanks BILL
Posting Permissions
Reply With Quote