Can anyone help me with this problema on my Camtech Laser L5 laser machine. Laser loses power sometimes when engraving.
Laser refill? wiring problem?
Thanks in advance
20170727_095449.jpg
Can anyone help me with this problema on my Camtech Laser L5 laser machine. Laser loses power sometimes when engraving.
Laser refill? wiring problem?
Thanks in advance
20170727_095449.jpg
Corel Draw x3, PS CS3, PhotoGrav 2.1,CamTech L5...
Yes 25 watts synrad air cooled laser tube. The laser is firing prety well now, could it be wiring? Cause i had some cables balancing a lot when engraving, but now i've fasten it with adhesive tape.
Corel Draw x3, PS CS3, PhotoGrav 2.1,CamTech L5...
gut feeling is likely what Bill seems to be thinking
Heat
You did what !