Page 2 of 2 FirstFirst 12
Results 16 to 18 of 18

Thread: Chinese laser engraving double image

  1. #16
    Join Date
    Mar 2014
    Location
    Iowa USA
    Posts
    4,441
    James is the cone on straight? You should be able to adjust that top mirror a bit to get beam more centered.
    Retired Guy- Central Iowa.HVAC/R , Cloudray Galvo Fiber , -Windows 10

  2. #17
    i got the beam dead center with the lens on. the tube itself was off kilter. once i compensated it worked fine. i also switched to x unilateral engraving and the ghosting issue went away. only other problem i am having at this point is my engraving is offset from my cutting. i.e. when i import an adobe illustrator keychain file, the engraved portion is halfway off to the right of the cutout portion. that's a software issue, i'm sure.

  3. #18
    by tube i mean the downward tube after the third mirror that houses the lens was off kilter

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •