I was having problems & couldn't post to SMC & I was missing off the members list After a couple of E-Mails back & forth so he could figure out what the problem was Aaron fixed the problem. Thanks a lot Aaron.
[OP]
Member
I was having problems & couldn't post to SMC & I was missing off the members list After a couple of E-Mails back & forth so he could figure out what the problem was Aaron fixed the problem. Thanks a lot Aaron.
I usually find it much easier to be wrong once in while than to try to be perfect.
My web page has a pop up. It is a free site, just close the pop up on the right side of the screen
Member
Well, we are glad to have you back, Bart.
Richard
Member
Glad we didn't lose you Bart! Welcome back
Jeff Sudmeier
"It's not the quality of the tool being used, it's the skills of the craftsman using the tool that really matter. Unfortunately, I don't have high quality in either"
Administrator
Bart,
You're welcome-
_Aaron_
SawmillCreek Administrator
Posting Permissions
Reply With Quote