I've got the:
T8
worksharp ws3000
sorby pro edge
veritas mk2 honing with shape on stones 300-16000
the works harp is definely the most used, it's just way more convenient than everything else and gets everything scary sharp... up to 2" wide. Then it's just st too inconsistent. That's when I I got the tormek, when I was struggling with wider blades. On top of that tormek does carving tools very well, and, if you have the patience, turning tools.
my current regent looks like this.
chisels: all done on worksharp.
all plane blades
n tormek (most could be done on the worksharp)
finish all plane blades with 16000 shaping stone.
Lapping: all lapping is done on the worksharp, again, it's just so fast.
turning tools all done on sorry pro edge.
to sum it up, the tormek is absolutely the most versatile, the WS is absolutely the best value. Honestly, MOST people would consider my tools strait off of either machine as sharp as anything sharpened on stones up to 8000
hope that helps!
cheers!