Hi All,
Could someone help me identify the font used here?
Thanks very much, John
IMG_0604.jpg
Hi All,
Could someone help me identify the font used here?
Thanks very much, John
IMG_0604.jpg
60w EFI 6090 & 100w Z4 Reci 6090 G Weike Lasers, 4 X 4 CNC Router
CLTT using Oki C822dn & Adkins Press
Glass Sandblasting, Woodwork Shop, etc...
V Carve Pro v8 & Photo V Carve, Lasercut 5.3, Corel Draw 2017 on Windows 7 and iMac (via Parallels), etc
It comes from the Souvenir font group
Epilog Helix 50W, Epilog Fusion 40 75W, Tekcel Router, Taylor Hobson Model D & K
Dalgren 2516i, Epilog Fusion Pro 120W
If you have older CorelDraw 8 & 12, they have the Souvenir font. I did not find it in X3 or X6.
I read recipes the same way I read science fiction. I get to the end and I think, "Well, that’s not going to happen."
Ed Benguiat's ITC Souvenir Demibold
I've used this a few times and it worked great. It also tells you fonts that are similar in style. Hope that helps
Identify Fonts - The Font Squirrel Matcherator
With Thanks to all of you for responding, really appreciate your taking the time to do so, will go give that a try. I could not get what the font etc to read the image correctly. Kind Regards, John
60w EFI 6090 & 100w Z4 Reci 6090 G Weike Lasers, 4 X 4 CNC Router
CLTT using Oki C822dn & Adkins Press
Glass Sandblasting, Woodwork Shop, etc...
V Carve Pro v8 & Photo V Carve, Lasercut 5.3, Corel Draw 2017 on Windows 7 and iMac (via Parallels), etc
Just a quick update: thanks for the font help and for a PM I had from one member of an offer of drawing help, I really appreciate all of you on here.
I have been able to send the job for approval now, large double sided foam sign with gold leaf:
www ColonialClassics co uk.png
Kind Regards, John
60w EFI 6090 & 100w Z4 Reci 6090 G Weike Lasers, 4 X 4 CNC Router
CLTT using Oki C822dn & Adkins Press
Glass Sandblasting, Woodwork Shop, etc...
V Carve Pro v8 & Photo V Carve, Lasercut 5.3, Corel Draw 2017 on Windows 7 and iMac (via Parallels), etc