What to use to sign turnings?

[Damon McLaughlin]

I just started signing my turnings and tried a fine tip sharpie. But I don't like the way it writes. Almost seems as if the pen is dry as the signing is light but when I try the pen on a piece of paper it looks fine. I read that an archival pen might be better but when I looked they come in so many sizes and I have no idea which to choose. So I was curious what you guys use. Thanks.

[Steve Schlumpf]

David, I use either a ZIG Millennium or a PIGMA Micron archival ink pens, both of them with .05 tips. As long as you sign the bare wood before applying finish, nothing seems to take it off.

[John Keeton]

David, I use either a ZIG Millennium or a PIGMA Micron archival ink pens, both of them with .05 tips. As long as you sign the bare wood before applying finish, nothing seems to take it off.

Same for me. On really dark pieces, a writing tip on my pyro setup.

[Justin Stephen]

Also use a Pigma Micron pen.

[Damon McLaughlin]

David, I use either a ZIG Millennium or a PIGMA Micron archival ink pens, both of them with .05 tips. As long as you sign the bare wood before applying finish, nothing seems to take it off.

Thanks guys, I appreciate the recommendations. Am I correct to assume that the .05 tips mean .05mm size tips?

[John Keeton]

Leo, I am not familiar with the brand of pen in the article you posted, but this is the information provided by Sakura, maker of the Pigma pen. https://www.pigmamicron.com/faq/

[Leo Van Der Loo]

Leo, I am not familiar with the brand of pen in the article you posted, but this is the information provided by Sakura, maker of the Pigma pen. https://www.pigmamicron.com/faq/

John I’m not familiar with any makes of them, just what a maker claims is not always true as we know al to well, I tend to be sceptical of claims that I can’t verify, where others have claimed the opposite, anyway I just thought that a burnt in writing would last longer and there would be no finishing problems, so that’s what I use and why I use it

[Jim Underwood]

I've been using a pyrography knife tip lately. I've used an engraver and a fine tipped sharpie in the past.

[John Keeton]

05 is actually .45 mm and the 005 is .20 mm.

[David Delo]

For me, extra fine sharpie or Copic Multiliner SP 0.1 but mostly burn with RazorTip Ball 1/32.

[Tim Passmore]

I use the Faber-Castell Pitt Artist Pen. I get them at Hobby Lobby and have been very pleased with them.

[John K Jordan]

I just started signing my turnings and tried a fine tip sharpie. But I don't like the way it writes. Almost seems as if the pen is dry as the signing is light but when I try the pen on a piece of paper it looks fine. I read that an archival pen might be better but when I looked they come in so many sizes and I have no idea which to choose. So I was curious what you guys use. Thanks.

Dave,

For light-colored woods I started using the black Faber-Castell Pitt pens, india ink. Someone on another woodturning forum highly recommended them. They work much better than the extra fine Sharpies.

I got this set:
20759-0089 -- http://www.dickblick.com/items/20759-0089/

At the time I ordered I didn't see this smaller set which is half the price and still has all the pens I use on turnings:
20759-2029 -- http://www.dickblick.com/items/20759-2029/

For dark woods like walnut and ebony I use a cheap vibrating electric engraving pen. I had to grind the tip to a sharp point.

I've tried the woodburning but I never got the hang of it.

JKJ

[Robert Edington]

I ordered from Signature Medallions custom made coins. They ran about $1.30 each. They look fantastic. I supplied my own art work. Great guy to work with.

RP
IMG_2713.jpg

[Louis Harvill]

Where did you get the Signature Medalllions cut made coins for $1.30 each. I'd order a bunch of them at that price.

[Justin Stephen]

Where did you get the Signature Medalllions cut made coins for $1.30 each. I'd order a bunch of them at that price.

http://signaturemedallions.com/home-1.html. $1.48/ea if you order 200 of the 1". You have to order at least 100.