Results 1 to 4 of 4

Thread: Cannot Vector

  1. #1
    Join Date
    Aug 2009
    Location
    Ferguson MO USA
    Posts
    141

    Cannot Vector

    Hello. I have several drawings that I have used for years that are set for vector engraving. However, when I now send the drawing to the ULS laser, the drawing comes out in light black and the machine starts to raster the drawing. This can work but is much slower than vectoring.

    Checked the drawing to make sure the lines are the proper size and color. Yes they are
    Checked Corel 12 program to ensure that the drawing is not going out in grayscale. Yes it is going out in color.
    Checked that the settings on the laser are to vector blue and red lines. Yes it is set that way.

    What else am I missing??


    Thanks, Jim
    Laser - Universal PLS 6.60; CNC Router - Gerber 408
    Corel 9 & Corel X2
    Hollow Woodworks

  2. #2
    Verify it's in RGB and it's the correct RGB color. Worst case scenario, make black a cut line
    Equipment: IS400, IS6000, VLS 6.60, LS100, HP4550, Ricoh GX e3300n, Hotronix STX20
    Software: Adobe Suite & Gravostyle 5
    Business: Trophy, Awards and Engraving

  3. #3
    Join Date
    Feb 2007
    Location
    Shohola, PA Pocono Mountains
    Posts
    1,336
    When you view layers are they all set to print?
    1 Laser, 4 CarveWrights, Star 912 Rotary, CLTT, Sublimation, FC7000 Vinyl, 911 Signs, Street Signs, Tourist Products and more.
    Home of the Fire Department "Epoxy Dome Accountability Tag and Accountability Boards".

  4. #4
    Join Date
    Aug 2009
    Location
    Ferguson MO USA
    Posts
    141
    Yes, Yes Yes!

    Thanks, Ross.
    Must have clicked the cmyk button unknowingly.
    Now that it is set for RGB it is working again.

    Thanks.
    Laser - Universal PLS 6.60; CNC Router - Gerber 408
    Corel 9 & Corel X2
    Hollow Woodworks

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •