I was asked (yesterday) for photos of my Veritas Custom #4 on the UK forum. Here they are …
Here is my #4: 42 degree bed, "Stanley" handle, mushroom knob ..
PM-V11 blade; chipbreaker modified with a partly-rounded leading edge, which has a small secondary at around 70-80 degrees; blade hollow ground at 32 degrees and free-hand honed to 13000 (Sigma).
Driver for the screws ...
Finally, shavings on Jarrah scrap quickly made for this post. This was into the grain. The quality of the surface is blemish-free. Smooth finish, but the example of wood is open-grained and quite coarse.
Regards from Perth
Derek