Originally Posted by
Mark Furjanic
Todd - I'm not Robert but I did get my C Flux remote programmed and the directions weren't very good. I held the button on the control box until I got 2 beeps and continued holding while I pressed the program button on the remote until I got the 3 beeps. It works like a charm.
I had to get a 220 switch from Laguna for my 1 1/2 hp and it turned out to be the entire control box, not just a switch. I just finished getting my Sawstop put together so I haven't had a chance to check the performance on my DC but I did put a 10' flex hose on it to see how it felt and it almost pulled my arm through the hose.