Hello All,
I am running a 50W Fiber Laser and getting what I can best describe as ghosting or shadow just to the left of my text. The material is stainless steel plate and I am using EZCad2.
Speed 300
Power 75
Freq 20
Start TC 100
Laser Off 75
End TC 100
Polygon TC 75
The shadowing seen in the image cannot be rubbed off... its basically a slight annealing.
fiber_ss_ghosting_issue_2.jpg
OOOO Advanced Settings
fiber_ss_ghosting_issue_3.jpg
I need some suggestions as to the setting I would look to adjust in EZCAD2 in order to lessen or alleviate the issue.
Thanks, John