Page 4 of 5 FirstFirst 12345 LastLast
Results 46 to 60 of 64

Thread: Those proud of their workshops, please post pics!

  1. #46
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    48,992
    Man...I wish I had room for a couch in my shop. LOL Seriously, very nice space, Steve!
    --

    The most expensive tool is the one you buy "cheaply" and often...

  2. #47
    Join Date
    Apr 2010
    Location
    Houston, Texas area
    Posts
    995
    Very nice, huge shops, Steven and Marty.
    Mark McFarlane

  3. #48
    Join Date
    Apr 2018
    Location
    West Yellowstone Montana
    Posts
    2
    I'm new to SMC, but have been trolling it for years. I thought I would post a few images of my shop while somewhat clean as an introduction. While not pretty, it has character, the 1000 sq' shop was originally built in 1927 as a maintenance shop for tour buses going into a National Park. It still has two full service pits, but I havenít figured out a way to incorporate those into my wood shop setup. It has lots of natural light which I like. The dust collector is being moved in the very near future into the storage room with the air compressor which will make room for the band saw and reduce the noise. Thank you to the community for all the helpful posts.
    fm1.jpgfm2.jpgfm3.jpg

  4. #49
    Is that a Hitachi planer? If so I have it's planer/jointer cousin. A buddy has a pit in his 2 car size garage shop. He uses it for "deep storage".

  5. #50
    Join Date
    Apr 2018
    Location
    West Yellowstone Montana
    Posts
    2
    It is a Hitachi, P100F. Deep storage would good be a good option for the pit, will have to think up plans for my access.

  6. #51
    Really nice! Love Canadian made General equipment.

  7. #52
    Been a while.

    These are some beautiful workshops.

  8. #53
    Just about finished with my ultra-budget garage shop and am very happy with how it turned out. The only missing piece is creating a table router with an insert on the main workbench attached to the table saw and some minor trim work. I also need to fill out the shop with more hand tools but that will come with time. I was worried the dust collection system wouldn't be powerful enough to move material up the vertical sections but so far it's managed to pull everything just fine. Originally I had planned on building my own workbenches but the lumber alone using 2x4's and plywood would have cost me more than purchasing the Harbor Freight workbenches with come with a hardwood top, vice, and drawers. You can find them on sale for $100 and modify them to fit your needs..incredible value. Part of the compromise with the wife meant I had to leave enough room to still park one of my cars so technically this is a one car garage workshop. Living in Arizona meant I had to insulate the garage door panels and add a portable air conditioner. It's enough to keep the workshop at ~80 in the dead of summer.

    Shop.jpg

    Harbor Freight workbenches mounted together. I re-purposed the drawers from these two into my mitre station.
    Shop01.jpg

    Mitre Station. The fence is a $20 piece of angle Iron from home depot. It's perfectly straight and durable as hell.
    Shop02.jpg

    Shop03.jpg

    Need to build a cart with wheels for the planer.
    Shop04.jpg
    Shop05.jpg

    In order to fit my car in the garage I had to mount the planer on a shelf which folds down. I wish I had a better permanent location for it but this is the only location which gave me the in-feed and out-feed distance I needed. I also left an additional 20 foot hose which I can use with electric hand tools or to vacuum the floor.
    Shop06.jpg

    shop07.jpg

    The flooring is one of the new polyurethane coatings which are "20 times harder than epoxy". It was expensive and horrible to apply but well worth the investment and seems to live up to the manufacturer's claims. It also makes it incredibly easy to clean (dust mop and leaf blower).
    Last edited by Marko Haarma; 07-06-2018 at 11:45 AM.

  9. #54
    Join Date
    Dec 2017
    Location
    Willard,Utah
    Posts
    132
    Very clean and nice! Now get some saw dust on that floor!

  10. #55
    I've spent the entire summer cleaning and overhauling my shop. Everything from dedicated 20 amp circuits, air filtration, lighting, and even air conditioning. When I can figure out how to post pics (I don't have options to do so) I will.

  11. #56
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    48,992
    Quote Originally Posted by Michael Costa View Post
    When I can figure out how to post pics (I don't have options to do so) I will.
    https://sawmillcreek.org/showthread....s-of-June-2011

  12. #57
    Marko, could you post more pics of the dust collection piping and setup?

  13. #58
    Join Date
    May 2010
    Location
    Surrey BC Ca
    Posts
    46
    thanks Larry love the shop and to me it seems "spare' as in roomy less is more, it is inspiring me to be more ruthless in my " throwing out" as i trans form my barn. also love the tagline

  14. #59
    Join Date
    Feb 2019
    Location
    San Diego, CA
    Posts
    3

    My humble corner of the garage.

    It all started with a wedding to plan and make stuff for and a coworker who wanted to clear out some unused wood tools. For $80 I got a Wen scroll saw (looked like it was used once), circular saw, belt/disk sander, orbital sander and a few assorted hand tools. Then I remembered my dad has a table saw and a router collecting dust somewhere in the garage. Here we are over a year later with a limited budget and limited space in the corner of the garage. It's not much compared to the workshop you folks have, but I'm proud of what I can do with so little space and tools.

    20190211_162927.jpg

  15. #60
    New to the sawmill creek community. Really appreciate all of the great threads and advice! Recently completed a reno of my basement shop - built walls in front of the 3in insulation that is adhered to the foundation. Really brightened things up and allows me to organize a lot of different items. Thanks again to everybody for making this such a great site for woodworkers!

    Cheers
    Brad


    fullsizeoutput_30a1.jpgZvNEmL9RSVyyGKNoj626Cg.jpgk13mv4IvQru7mHn+7D4UDA.jpgLLjYw6DMQFi4s0khzlQ9qw.jpg
    Attached Images Attached Images

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •