Deep Sanding Question

[Bill Jobe]

I may have overlooked someone else posting these, but here they are again.

https://goo.gl/images/KjYJOj

[robert baccus]

My favorite deep sanders consist of a 3/4" to 1" dowel at least 18" long. Use some old or cheap duct tape and make a suitable sized ball on the end. Take a 4-6" stickback round sandpaper and just center it on the end and turn all the flaps to your direction of turn. Cheap--make several as needed. These can be used a fairly high speed--BTW be sure to hold on with both hands. This is the only rule. Also I use a 12" long drill extension with a 2-3" factory pad and sandpaper disc. Simply hold the shaft closest to the vase in a paper towel(no rags here) to guide the sanding pad. Of course the other hand holds a corded drill or whatever.