2nd Build (first) - CNC Router

Originally Posted by Mike Heidrick

For my spindle I ran Igus Chainflex power cable to the Amphenol Ecomate connector. I changed out the chinese solder cup junk connector for the ecomate.
connectors
http://www.digikey.com/catalog/en/pa...mate-c016/2185

power cable
https://www.google.com/url?sa=t&rct=...,d.eWE&cad=rja

Hey Mike - I went back and looked at the link to the Power Cable and the URL references the CF30-100-04 cable which is a #8 AWG size; is that what you used? That just seems awfully large unless the run is long or your spindle is huge. Just curious...

Thanks!
David