Page 1 of 2 12 LastLast
Results 1 to 15 of 22

Thread: My new babies

  1. #1
    Join Date
    Jan 2016
    Location
    Colorado
    Posts
    13

    Thumbs up My new babies

    Hi Everyone. I just wanted to show off my first 2 high quality chisels.

    Lie Nielsen 3/8" chisel

    and

    Koyamaichi 3/4" regular chisel from toolsfromjapan. I still need to buy a hoop setting tool and mushroom over the fibers.


    2chisels.jpg

  2. #2
    Join Date
    Jan 2005
    Location
    Milton, GA
    Posts
    3,213
    Blog Entries
    1
    Congrats Joey! I think it is a good idea to try out a chisel or two of types you are interested in before investing too deeply. There are lots of nice chisels in so many varieties it can boggle the mind sometimes.

    Hope you enjoy them for years to come.

  3. #3
    Join Date
    Jan 2016
    Location
    Colorado
    Posts
    13
    Thanks Mike! It is overwhelming how many options you have! Do you have a personal favorite chisel?

  4. #4
    Join Date
    Mar 2016
    Location
    Tokyo, Japan
    Posts
    885
    Why not just make your own hoop setting tool in a block of wood? Drill a hole big enough for the wooden handle and taper/(flare?) it out at the top.

    Nice babies, though! I bought some rather inexpensive firmer-style oire nomi used just to give Japanese chisels a try. I like the small size for detail work and accurate chopping, and for transport; prefer my western chisels with their border-line bulky handles for paring, though I know there are much more suitable styles of Japanese chisel for paring.
    Last edited by Luke Dupont; 06-05-2016 at 1:46 AM.

  5. #5
    Join Date
    Jan 2013
    Location
    Temecula,CA
    Posts
    442
    Very nice! My first premium was a LN 1/2" followed by a LV 1/4". I eventually settled on LN but I could have gone either way. Congrats and may your babies soon have more siblings haha

  6. #6
    Join Date
    Jan 2005
    Location
    Milton, GA
    Posts
    3,213
    Blog Entries
    1
    Joey, I took delivery on 12 & 18mm Usu-nomi recently and they are amazing, very fun to use. Actually my favorite is always the one I have in my hand.

  7. #7
    A suitable sized socket will do a good job for hoop setting.

    David

  8. #8
    Join Date
    Feb 2003
    Location
    Twin Cities, Minnesota
    Posts
    274
    In another forum David offered this same advice to me about using a socket and it worked perfectly.

  9. #9
    Join Date
    Aug 2007
    Location
    Dickinson, Texas
    Posts
    7,655
    Blog Entries
    1
    Quote Originally Posted by Joey Arispe View Post
    Hi Everyone. I just wanted to show off my first 2 high quality chisels.

    Lie Nielsen 3/8" chisel

    and

    Koyamaichi 3/4" regular chisel from toolsfromjapan. I still need to buy a hoop setting tool and mushroom over the fibers.


    2chisels.jpg
    What is a hoop setting tool?

    Why wouldn't a mallet be preferable?

  10. #10
    Join Date
    Mar 2016
    Location
    Tokyo, Japan
    Posts
    885
    Quote Originally Posted by lowell holmes View Post
    What is a hoop setting tool?

    Why wouldn't a mallet be preferable?
    Usually it's a tapered hole to allow the wood part of the handle to protrude past the metal hoop as it's set on. You don't want the hoop flush; you want it a little lower so that it doesn't get mushroomed over the end with use which would prevent a tight fit.

  11. #11
    Join Date
    Aug 2007
    Location
    Dickinson, Texas
    Posts
    7,655
    Blog Entries
    1
    Since I don't normally use Japanese chisels, I never dealt with the issue. I don't normally strike a chisel other than mortise chisels. My Ray Iles and Lie Nielsens will take the beating.

    I have chopped mortises with blue handle Marples, but they took it.

    I only use mallets to strike a chisel, though some one was talking about hitting them with a carpenter's hammer.

  12. #12
    Join Date
    Mar 2016
    Location
    Tokyo, Japan
    Posts
    885
    Quote Originally Posted by lowell holmes View Post
    Since I don't normally use Japanese chisels, I never dealt with the issue. I don't normally strike a chisel other than mortise chisels. My Ray Iles and Lie Nielsens will take the beating.

    I have chopped mortises with blue handle Marples, but they took it.

    I only use mallets to strike a chisel, though some one was talking about hitting them with a carpenter's hammer.
    Right. For western chisels, a mallet is definitely the way to go. Japanese chisels are made to be used with specialized metal hammers, and have thinner handles, hence the hoop.

    I'd say that metal rings/hoops are quite unnecessary on western chisels, but they make sense for Japanese chisels and how they're designed to be used.

  13. #13
    Join Date
    Jan 2005
    Location
    Milton, GA
    Posts
    3,213
    Blog Entries
    1
    Lowell, I believe the "hoop setting tool" is a simple piece of metal that fits over the end of the chisel coming to rest on the metal hoop. Striking the hoop setting tool helps drive the ring down uniformly around the handle. At least I am assuming that the blue devise in this picture is one. It came with a chisel order I made and has come in handy. They may very well come in different shapes and materials, but maybe this picture will help:

    Hoop Setting.jpg
    click to enlarge
    Last edited by Mike Holbrook; 06-05-2016 at 11:19 PM.

  14. #14
    Join Date
    Jan 2016
    Location
    Colorado
    Posts
    13
    Thanks for the time and money saving tip, David!!

    Those are gorgeous chisels in your picture Mike! Stunners!

  15. #15
    Join Date
    Jan 2005
    Location
    Milton, GA
    Posts
    3,213
    Blog Entries
    1
    Joey, have to love a little tool porn.

    The chisel on the left is a Koyamaichi mortise chisel, center is a Ouchi bench/butt chisel, right is a Koyamaichi medium striking chisel. Despite the different size rings/handles the tool pictured set all three hoops.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •