Results 1 to 5 of 5

Thread: Question About Makita Electric Chainsaw Oiler

  1. #1
    Join Date
    Jan 2006
    Location
    Chicagoland
    Posts
    2,802

    Question About Makita Electric Chainsaw Oiler

    My saw is like new. I don't have a lot of chainsaw experience but the chain on this saw seems dry compared to my gas saw. The oiler path looks clear of debris and I can see a little oil but the chain looks dry. I cut 5 logs into bowl blanks and the oil indicator still shows full. Any suggestions on what to check appreciated.

    Thanks

    Mike

  2. #2
    Join Date
    Jan 2006
    Location
    Chicagoland
    Posts
    2,802
    Ok - I looked a little closer and ran the saw w/o the bar. Oil was being fed but very slowly. I then put some thin Marvel Mystery oil in it and now it's spewing the oil. Maybe the original oil I used was too thick?

    Thanks

  3. #3
    Join Date
    Jul 2008
    Location
    Atikokan, Rainy River district, Ontario
    Posts
    3,540
    We/I here up North use two different bar oils, summer bar oil (thicker) and winter bar oil (thinner), your supplier should carry these I would think HTH
    Have fun and take care

  4. #4
    Join Date
    Jan 2007
    Location
    Ottawa, ON Canada
    Posts
    1,476
    I have that saw and the oiler is not the greatest. "Standard" chain saw oil will barely make it to the chain, even in hot summer weather. As you've found out, and as Leo mentioned, go thinner and all is well.
    Grant
    Ottawa ON

  5. #5
    Join Date
    Jan 2006
    Location
    Chicagoland
    Posts
    2,802
    Thanks - I'll look for the thinner oil.

    Mike

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •