Thanks for the advice. I took Larrys advice and put AC66U in my cart. Can it be set up without a cell phone???????
Thanks for the advice. I took Larrys advice and put AC66U in my cart. Can it be set up without a cell phone???????
Fred
In addition to considering updating your wireless router to something more contemporary and capable, you can also put a second AP in your shop by using PowerLine extenders. For utility, that could simply be your old router reconfigured to just be a wireless access point. I have to use multiple AP's in my home due to multiple factors. Relative to your wireless (cell) phone, major carriers offer MicroCells that you can put in your home and they use your broadband service to backhaul your phone to their network. Further, the major carriers are also not supporting WiFi calling, at least on many of the latest phone models/versions. For the same reasons that I need multiple APs for wireless networking in our home, I need to use a MicroCell for cell service inside, too.
--
The most expensive tool is the one you buy "cheaply" and often...
Fred,
You will not be sorry you got this router!
I am not sure how to answer your question. Setting up this router has nothing to do with your cell phone. You would first replace your existing router with the new one by unplugging the network cables from the old one and plugging them into the same plug on the new one. It would be easiest to hard wire one of the 4 lan ports on the router directly to your PC and then follow the instructions to connect to the new router using the browser on your PC. The IP address is normally 192.168.1.1.(it might be different, you need to refer to the documentation that comes with the router) You would type that into the web address box of your browser (instead of www.sawmillcreek.org) That should bring up the router's logon page. All of this should be in the "Getting Started" sheet that comes with the router. After you get it set up you should be able to connect your cell phone to it. But a cell phone is not needed or even recommended to set up your new router.
Or maybe I simply misunderstood the question.
Last edited by Larry Browning; 12-14-2015 at 2:28 PM.
Larry J Browning
There are 10 kinds of people in this world; Those who understand binary and those who don't.
Here's something else to keep in mind. All routers from the same manufacturer used to come with the same default user name and password. If you needed to reset to factory defaults, you could google the router model and find the default user name and password. I hope that is no longer the case, it was a huge potential security flaw. Routers from Verizon and I hope others now come with unique user names and passwords. Don't lose those. If you have to do a factory reset you'll need them. If there isn't one already maybe write them on a sticker and stick it on the bottom or some place inconspicuous.
Last edited by Curt Harms; 12-15-2015 at 9:28 AM.
The last couple of routers I worked with had the username and password printed on the bottom next to the mac address. Appeared to be at least a unique password, very long.
NOW you tell me...
Is is the router or is your service interrupting?
I tried a repeater/range extender which was supposed to have a 450' range. Very dissapointed in results going about 100' from house to barn.
Ended up running cable to barn and installing a second wireless works great now.
The power line extender set I used and linked to previously provides two wired connections plus a WiFi access point in the shop with no other hardware necessary. Judging from the cost of competing brands, the wireless feature doesn't cost extra. I have never used the wired connections in the shop except to just verify they worked.
I've said this on a number of previous threads, but I had one with issues, I installed DD-WRT on it, which wipes out the factory firmware and replaces it. You can then change the signal strength on it as well. That router is still running several years after I was about to throw it in the trash. Plus I have a LOT more control over things with it.
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.
Isn't this typical when someone has made up their mind they need to buy something. Sometimes the challenge is figuring out what to buy instead of making what you have work.
I keep hearing people tell me "I need a new computer". I keep saying "No you don't, you just need to stop downloading useless junk and particularly stop looking for really damaging junk designed to improve your computer".
Bit of a pet peeve of mine. Computer X was working just fine when you bought it and was plenty fast. Three years later it has slowed to a crawl, so the obvious answer is "It's old and useless, time to buy another computer!". No, you're still running the same software as three years ago, so it's just junk causing issues. Clean everything up (start with a fresh install, if you have to) and get back to what you were happy with before. Save the money. Buy a new system when HARDWARE breaks.
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
FYI - Check with your ISP and see if they provide a router at no cost.
"Remember back in the day, when things were made by hand, and people took pride in their work?"
- Rick Dale