I'm somewhat confused as to what depth my rail tenon and corresponding stile slot should be on raised panel cabinet doors and drawers. There seem to be a number of choices based on what I've read and seen on actual cabinetry.
I anticipate some may want to know design details so here they are:
The door and drawer style will be Shaker with a simple raised panel, absent of any profile details such as ogee or bevel.
Stock for rails and stiles will be a finished 3/4" thick.
Tenon and slot will be 1/4" thick.
Rails and stiles will be solid maple.
Raised panels will be either solid maple or MDF.
Rails and stiles will be approximately 2" wide, give or take a 1/4".
Thanks in advance for your input,
Stuart