Looking for someone with ArtCAM to verify if they are able to use single-stroke fonts (DIN) looks like one that comes with it. Their evaluation program has no ability to print, so no way for me to test and see if the laser will do a single trace or if it will run over it twice. If you have the program and are willing to test it, the easiest way to find out if it works would be to create a 2 or 3 inch "o" and see if running a 5% or so vector speed causes it to trace once or twice. The 5% is arbitrary, if you can watch faster, by all means All TrueType fonts (windows) will trace twice, hoping this is a solution. No Corel posts here please.