I saw this and just had to take a screenshot...
computers never make mistakes, right?
.
.
.
[OP]
Contributor
I saw this and just had to take a screenshot...
computers never make mistakes, right?
.
.
.
Last edited by Kev Williams; 11-03-2015 at 4:34 PM.
========================================
ELEVEN - rotary cutter tool machines
FOUR - CO2 lasers
THREE- make that FOUR now- fiber lasers
ONE - vinyl cutter
CASmate, Corel, Gravostyle
Contributor
I'm obviously not getting the joke...
Still a month or so before the first one actually hits the street, innit?
Yoga class makes me feel like a total stud, mostly because I'm about as flexible as a 2x4.
"Design"? Possibly. "Intelligent"? Sure doesn't look like it from this angle.
We used to be hunter gatherers. Now we're shopper borrowers.
The three most important words in the English language: "Front Towards Enemy".
The world makes a lot more sense when you remember that Butthead was the smart one.
You can never be too rich, too thin, or have too much ammo.
Member
+1 I saw nothing about itOriginally Posted by Lee DeRaud
Universal Laser ILS 12.150D (48"x24") 135 watts total, with 60 watt and 75 watt laser cartridges. Class 4 Module (pass thru ability). Photograv 3.0, Corel X6, Adobe Design Standard CS4 Suite, Engrave Lab laser Version 8, Melco Single Head Comercial Embroidery Machine, The Magic Touch System with Oki C711WT printer, and Graphtec CE6000-60 plotter.
Moderator
Probably referring to the number of 771 people on the engraving forum at that point in time. That's a lot for even the laser section.
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.
[OP]
Contributor
771 viewing, exactly- the most I've EVER seen is 108! Pretty sure it's just a glitch.
========================================
ELEVEN - rotary cutter tool machines
FOUR - CO2 lasers
THREE- make that FOUR now
ONE - vinyl cutter
CASmate, Corel, Gravostyle
Member
Possibly not given there have been links to SMC posted quite a bit on facebook lately
You did what !
Contributor
Be afraid. Be very afraid.Possibly not given there have been links to SMC posted quite a bit on facebook lately
Yoga class makes me feel like a total stud, mostly because I'm about as flexible as a 2x4.
"Design"? Possibly. "Intelligent"? Sure doesn't look like it from this angle.
We used to be hunter gatherers. Now we're shopper borrowers.
The three most important words in the English language: "Front Towards Enemy".
The world makes a lot more sense when you remember that Butthead was the smart one.
You can never be too rich, too thin, or have too much ammo.
Member
I've been eating crayons most of the day and drawing on the walls with a pencil between my toes everytime GF is mentioned
You did what !
Contributor
Exactly why I don't do FB
I've been eating crayons most of the day and drawing on the walls with a pencil between my toes everytime GF is mentioned
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
Member
It's nice to see that you're all so will to make GF owners welcome :/
Member
What is this Facebook that you make mention of?
Contributor
Its kinda like we tell you a thousand times over don't jump off the Bay Bridge but you do it any way then you expect us to come rescue you.
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
Administrator
I suspect that the abnormally large number of connections in the Engravers Forum this afternoon was due to an invasion by web bots. Our Server Administrator Aaron Koehl went into overdrive to combat the invasion this afternoon.
Member
It's more like you would prefer everyone follow you off your bridge rather than find one of their own.
Its kinda like we tell you a thousand times over don't jump off the Bay Bridge but you do it any way then you expect us to come rescue you.
Posting Permissions
Reply With Quote