[OP]
Member
We have a Universal 40w laser with rotary attachment.
I create the artwork in CorelDraw X6, and when I print, the letters and words show up skewed and streaked in the Universal software that drives the laser.
When just doing flat engraving there is no problem.
Anybody have this problem and maybe a solution?
Thanks.
Contributor
A photo would be helpful. Are you setting the Diameter in the universal software? Did it just start happening or is this the first time you have attempted rotary items.
.
Mark
In the Great Northwest!
Trotec Speedy C25, Newing-Hall 350 (AMC I & HPGL), NH-CG-30 (Carbide Cutter Sharpener)
Sawgrass 400 Gel Ink Printer, CS5, 5/9/x6 CorelDraw
Member
I use Corel with my ULS M-300. Somewhere in the driver you should enable the rotary attachment. You have to set your page up to the correct size as well (diameter x 3.14) and length both in the driver and the corel page.
Beyond that it shouldn't see any differences versus flat engraving.
Laser: ULS M300-50 watts, ULS X25-75 watt, Chinese 100 and 150 watt
Software: Corel Draw, Corel PhotoPaint X8, Aspire, MasterCam, Fusion 360
CNC: Rockler 60th Anniversary Edition CNC Shark, EZ-Route CNC
Kingsley Hot Stamp machine
"Out of my mind....Back in 5 minutes"
Reply With Quote
