Good afternoon everyone. I have another finishing question. Attached are pictures of a cabinet door in my fifth wheel trailer. The first one shows the whole door and the second one shows a closeup of the finish. The paperwork says that the are maple doors. I am trying to duplicate the finish on some doors I am making. I have been using shellac to seal the wood first and then have been trying different stains and dyes. Some mixed with shellac and some gel stains. My problem has been getting an even color with little variation like the doors have. Obviously these are production doors but I would like to get close. I have spray equipment and can mix and match as needed. Any thoughts or suggestions? Any advice is appreciated. Thanks.
Cab door.jpgCab door closeup.jpg