Create a square in your laser program, say 50mm by 50mm, cut it out, measure and let us know what your actual cut dimension is.
Scott
Create a square in your laser program, say 50mm by 50mm, cut it out, measure and let us know what your actual cut dimension is.
Scott
Rabbit Laser RL-60-1290, Rotary attachment, Corel Draw x6, Bobcad Ver 27
Juki-LU 2810-7, Juki 1900 AHS, Juki LU-1508, Juki LH-3188-7, Juki LH 1182
Sheffield 530 HC webbing cutter
Hi Ron,
Lets start at the very beginning. When you first turn on your machine does it go to a corner nicely and find it's home position ?
What corner does it go to ? Does it slam into the corner or does it stop when it's supposed to ?
After that does it go to the origin you have set ? Question 1 is the most important for now.
Gozzie
Thunder Laser MARS 90 (130 watt)
RD Works V8
1 Phillips Screwdriver
1 Straight Edge
1 Hammer
1 Dull Chisel
1 Pencil Sharpener (manually operated)
Make your work area 1mm less in both the x and y axis then you must upload the .cfg file to your laser overwriting the default settings.
I have an X700 that came from cnccheap 5 years ago and once set up is an excellent machine.
John
Cheapcnc if believe if the offical account of redsail. I asked if it was them sometime ago. I email them directly myself and have always gotten a pretty quick response rememberint the time diferencd. Try a direct email