Took a break from wood working and made this simple tool tote from 24ga galvanized steel. 16"'x8" x4". Second photo shows how I secured the EMT handle with a short piece of 1/4" Alum rod hammered in place to form a rivet.
[OP]
Member
Took a break from wood working and made this simple tool tote from 24ga galvanized steel. 16"'x8" x4". Second photo shows how I secured the EMT handle with a short piece of 1/4" Alum rod hammered in place to form a rivet.
No PHD, but I have a DD 214
Member
Very nice work on bending and fitting.
_______________________________________
When failure is not an option
Mediocre is assured.
Reply With Quote
