Brian, I tried it this morning. I slipped a 2' Milton blow gun in there, has a bit of a hook on the end aimed right at the cut, secured it and taped the trigger down. Worked like a charm. I'd say 90% of it went out through the hood.
Thanks, Larry
Brian, I tried it this morning. I slipped a 2' Milton blow gun in there, has a bit of a hook on the end aimed right at the cut, secured it and taped the trigger down. Worked like a charm. I'd say 90% of it went out through the hood.
Thanks, Larry
I've used the air gun app also and was going to suggest it when I started reading this thread. Dust is the bitch you pay when climb cutting for sure.
Here's a recent climb cut I snapped a photo of, around 1000 lf two edges of ash to run, had to have perfect show faces, big ole pile of chips when done. Glad it was only ash. The garbage can was my half hearted attempt at chip collection....it was totally full by the end....as was the floor for about 10' past the shaper. The other guys really love me for this!
"A good miter set up is like yoga pants: it makes everyone's butts look good." Prashun Patel