Below is a picture of a 3D star that Aaron made the other night. This is our first time using the 3D capabilities of our ShopBot. A generous ShopBotter uploaded the file and made it available for free recently on ShopBots Forum.
The 6" diameter star was routed on a scrap of African Mahogany I had left over from another project. When we first purchased our ShopBot Jim Becker asked me if we intended to produce some wood projects in addition to the Corian sign blanks we had purchased the router for. Jim, here is the first of many projects to come...now we need to purchase the software so we can start designing our own projects.