[OP]
Member
Ok,
So I had a little fire. Not big, but the little flame was enough to be right over one of my bearings. Which melted a bit. So now lines are not straight or circles perfectly round. When it hits that un-even part the laser head wobbles a bit. Well I sanded the bearing down a bit. Now it's better, but still not how it was.
I have a redsail x700. Do any of you know of a place the sells bearings.
Bearings.jpg
Redsail x700, 50watt & Shenhui 350, 50 watt
Contributor
cant you get them from redsail? also lightobjects might have them
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machineOh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
[OP]
Member
Well, yes I should be able to. But you know it takes longer from china!Originally Posted by Bert Kemp
Redsail x700, 50watt & Shenhui 350, 50 watt
Posting Permissions
Reply With Quote