I'm at the point where I'm getting sick of having to play musical chairs with the USB's and think it's time to hammer down the issues. Here's what's going on
- Turn my MBP laptop computer on (holding option for Win Boot camp) and start Win 8.1
- Open Corel Draw
- Plug USB from Epilog 40w Mini 24 & turn on
- open the print and driver window and let the games begin !
Under Printers I see the local printer I setup using the correct Epilog driver & instructions. However when I plug the USB in I also see an Unspecified hard drive looking icon pop up. This icon has a ! hazard sign at the bottom left corner of the icon. If I unplug the laser USB only this icon disappears, the other setup for USB #002 remains. So my morning routine has been plug it in, take it, play with the driver enable button, switching the port numbers from USB #001 back to USB #001, etc... Really anything that will get my computer to recognize it.
I've read a few other people with my current setup and seem to have no issues. Any advice or tricks please let me know ! I'm pulling my hair out trying to get these machines to play nice.
Thank you
Chris