Results 1 to 12 of 12

Thread: Need Help Identifying Veneer

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Sep 2013
    Location
    Wayland, MA
    Posts
    3,685
    English walnut? Doesn't look like any cherry I've ever seen. I'd try really hard to save it rather than replacing it, but the damage isn't evident to me in the photo.

  2. #2
    Join Date
    Jul 2008
    Location
    Courtenay BC Canada
    Posts
    2,750
    My first guess is also Cherry ..

  3. #3
    Join Date
    Dec 2003
    Location
    Mountainburg, AR
    Posts
    3,031
    Blog Entries
    2
    This is how most of these "what kind of wood is this" threads go. You get a couple folks saying it's one species and then someone always say "That doesn't look like any <insert species here> I've ever seen!, I think its some other wood." (that looks nothing like what the first guess was). I think about the best we can do is say what it definitely is not. So I'm sure it's not oak! Can we all agree on that?
    I also would say that Mike has pointed out some issues that will cause you major problems if you attempt to replace only part of the veneer.
    And for all of the above reasons I think Roger has some of the best advice, to do everything you can to save the existing veneer. I think it's about the only way you will get it looking anywhere near to what it was before the damage.
    Larry J Browning
    There are 10 kinds of people in this world; Those who understand binary and those who don't.

  4. #4
    Join Date
    Mar 2009
    Location
    Seabrook, TX (south of Houston)
    Posts
    3,093
    Blog Entries
    3
    Quote Originally Posted by Larry Browning View Post
    This is how most of these "what kind of wood is this" threads go. You get a couple folks saying it's one species and then someone always say "That doesn't look like any <insert species here> I've ever seen!, I think its some other wood." (that looks nothing like what the first guess was). I think about the best we can do is say what it definitely is not. So I'm sure it's not oak! Can we all agree on that?
    I also would say that Mike has pointed out some issues that will cause you major problems if you attempt to replace only part of the veneer.
    And for all of the above reasons I think Roger has some of the best advice, to do everything you can to save the existing veneer. I think it's about the only way you will get it looking anywhere near to what it was before the damage.
    Yes sir, he nailed it.

  5. #5
    Thank you to all who responded. I've got it narrowed down to 2, both where suggestions from people here. It appears to either be Claro Walnut, or English Walnut. In either case, it's heavily figured. I was able to remove a small section of the damage and sand it down. Once I sanded it, it was pretty clear it was some type of walnut. Researching veneers, it looks similar to both, but knowing this table came from England, and the owners were never near California or the west coast, my guess is figured english walnut. Now I just have to find a source. Thank you all.

  6. #6
    Join Date
    Dec 2003
    Location
    Mountainburg, AR
    Posts
    3,031
    Blog Entries
    2
    Quote Originally Posted by John Clumpner View Post
    Thank you to all who responded. I've got it narrowed down to 2, both where suggestions from people here. It appears to either be Claro Walnut, or English Walnut. In either case, it's heavily figured. I was able to remove a small section of the damage and sand it down. Once I sanded it, it was pretty clear it was some type of walnut. Researching veneers, it looks similar to both, but knowing this table came from England, and the owners were never near California or the west coast, my guess is figured english walnut. Now I just have to find a source. Thank you all.
    Have you looked at going the repair route? I think you are going to run into some major trouble trying to replace only a portion of the veneer.
    Larry J Browning
    There are 10 kinds of people in this world; Those who understand binary and those who don't.

  7. #7
    Join Date
    Sep 2013
    Location
    Wayland, MA
    Posts
    3,685
    Quote Originally Posted by Larry Browning View Post
    This is how most of these "what kind of wood is this" threads go. .
    OK, point well taken. I don't know what it is. My guess was based on being reminded of English Walnut by the dark swirls through the wood. Here's an example English-Walnut-Duck-Call-Blank-Fancy-Grain-Item-153etsx153.jpg. That said, it's really pretty, and I really don't know what it is.

  8. #8
    Join Date
    Dec 2003
    Location
    Mountainburg, AR
    Posts
    3,031
    Blog Entries
    2
    Quote Originally Posted by roger wiegand View Post
    OK, point well taken. I don't know what it is. My guess was based on being reminded of English Walnut by the dark swirls through the wood. Here's an example English-Walnut-Duck-Call-Blank-Fancy-Grain-Item-153etsx153.jpg. That said, it's really pretty, and I really don't know what it is.
    In no way am I saying I think you are wrong. It's just that it is really hard to tell exactly what species a piece is from a picture. It's hard enough in person. I guess that's one reason there are so many of this type of thread.
    Last edited by Larry Browning; 11-13-2014 at 1:27 PM.
    Larry J Browning
    There are 10 kinds of people in this world; Those who understand binary and those who don't.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •